How to solve the abnormal noise of wiper blade?

 When driving in rainy weather, the wiper blades are not clear, and abnormally noisy and vibrating. Please immediately check whether the glass of your car is greasy, muddy, or whether the windscreen wiper blades are aging. After inspection and treatment, the wiper is still not clear and noisy, please replace the windshield wiper blade immediately.

 

Here are the common causes and step-by-step solutions for solving noisy wiper blades, organized by symptom:

Quick Self-Check & Solution Guide:

Symptom / Noise TypeMost Likely CauseStep-by-Step Fix (Easiest to Hardest)
Squeaking / Screeching1. Worn, hardened, or uneven blade edge
2. Dirty windshield (oil, wax, debris)
3. Improper blade angle or tension		1. Deep Clean Windshield: Use a dedicated automotive glass cleaner or clay bar to remove grime.
2. Clean Wiper Rubber: Wipe the blade edge with a cloth dipped in rubbing alcohol or vinegar-water mix.
3. Replace Wiper Blades: If cleaning fails, replacement is the most reliable fix.
Chattering / Skipping & Noise 1. Windshield not perfectly clean
2. Blade not fully contacting glass (warped frame, weak springs)
3. Wiper arm tension/angle issue.		1. Thoroughly Clean Glass (as above).
2. Check Wiper Arm: Lift the arm; it should snap back firmly. If loose, the spring may be weak.
3. Adjust Wiper Arm Angle: For advanced DIYers; otherwise, seek a mechanic.
Noise in One Direction Uneven wear on the wiping edge, causing different friction.1. Clean the blade.
2. Replace the wiper blade insert or entire assembly.
“Clunking” Mechanical NoiseWorn or dry linkage/pivot points in the wiper transmission.Apply a small amount of white lithium grease to linkage joints. Avoid over-greasing.

 

Key Operation Tips & Prevention:

  • The Golden Rule: Clean Thoroughly： 90% of noise comes from a dirty windshield. Regular car washes don't remove invisible oily film. Use a dedicated glass cleaner.
  • Use “Home Remedies” with Caution： Methods like sanding the rubber with sandpaper are often temporary and can damage the blade. Not recommended.
  • When to Replace： If noise persists after cleaning, or if the rubber shows cracks, stiffness, chips, or is over 1 year old, replacement is the best solution.

·  Preventive Maintenance：

  • Always use washer fluid before wiping on a dry windshield.
  • Clean the blade edges monthly with a wet cloth.
  • Lift wipers off the glass during extended parking (especially in hot/cold weather) to prevent rubber deformation.

 

If you want to find good quality wiper blade, pls consider Xiong Shun Automobile Material (Xiamen)Co.,Ltd. It is a professional Wiper Blade manufacturer with more than 40 years‘s experience, produce many types wiper blades,including bus wiper blade, snow and ice wiper blades,back windscreen wiper, marine wiper blade ,heavy duty wiper blade refill , etc.

Comments

Post a Comment

Popular posts from this blog

Why is frequency stability important?

Image
  As societies accelerate the adoption of smart grids, distributed energy resources, and electric vehicles, the importance of maintaining stable frequency through   precision timing devices   such as crystal oscillators becomes increasingly evident.                           Frequency stability in smart grids Smart grids are designed to balance supply and demand dynamically. They integrate renewable generation, real-time monitoring, and advanced control systems. For these systems to function seamlessly, frequency must remain stable across the entire network. Even small deviations can lead to synchronization problems between substations, energy storage units, and transmission infrastructure. A  crystal oscillator  provides the time reference needed for accurate communication protocols, grid synchronization, and protection systems, allowing distributed components to coordinate effectively.   Dis...
Read more

ANKAI E12S Double-Decker Sightseeing Bus: First-Class Comfort Where Scenery Is at Your Fingertips

Image
  When a city ' s charm calls for savoring every detail, when every street carries its own unique story, you need an extraordinary way to begin your exploration. The ANKAI E12S  pure electric double-decker sightseeing bus  seamlessly blends the classic "aerial perspective" with cutting-edge green technology. More than just transportation, it is a mobile viewing platform designed for tourists — a starting point for unforgettable urban memories. For sightseeing, vision is everything. The E12S ’ s double-decker design elevates the viewing experience, allowing passengers to effortlessly gaze over traffic and crowds, taking in the grandeur of landmarks and the charm of streetscapes in one sweeping glance. The second-floor roof features either a panoramic sunroof or an open-top design, while large sightseeing windows on both sides enhance brightness and openness — as if framing the city in a moving picture. Every passenger enjoys unobstructed, breathtaking views, no matter wher...
Read more

How to Improve the Frequency Stability in Oscillator Circuits?

Image
  In advanced electronic drive systems, precise frequency control is the foundation of reliable operation. Oscillator circuits generate the timing signals that govern switching actions in power electronics, synchronize digital control units, and maintain steady communication between components. Without accurate oscillator performance, even well-designed motor drive systems can suffer from instability, increased losses, or reduced efficiency.   As motor technologies evolve, the requirements placed on oscillators have become increasingly demanding. In  electric vehicle (EV) drive motors , switching frequencies must remain consistent under rapidly changing load conditions.  Robotics and servo applications  depend on precise oscillation to achieve exact positioning.  Unmanned aerial vehicles (UAVs)  require stable timing sources to maintain responsive motor control during flight. Similarly,  industrial frequency inverters  rely on oscillator circ...
Read more